Queens House Rewiring handles the electrical for kitchen and bath remodels, additions, and gut renovations from rough-in through final trim. A renovation is the ideal moment to get the wiring right, because the walls are open and new circuits, dedicated appliance runs, and modern protection can all go in cleanly. We plan the circuit layout to the design, rough in the boxes and cable, coordinate with the other trades, and return to finish the devices and fixtures once the walls are closed. Everything is wired to current code by a NYC-licensed master electrician, permitted, and inspected by the NYC DOB at rough-in and again at final. Good renovation wiring is invisible when it is done and dependable for decades.
Before any cable is pulled, we work from the renovation plans to lay out circuits, outlets, lighting, and switching so the finished space works the way you will actually use it. Kitchens and baths in particular need careful planning for appliance loads, GFCI locations, and layered lighting. Getting this right on paper avoids the frustration of missing outlets and awkward switch placement later. The layout is where a smart renovation wiring job is really won.
With the walls open, we run new home-runs and dedicated circuits for the loads that require them, a range, a dishwasher, a microwave, a bathroom, an HVAC unit, so each heavy appliance gets its own protected circuit. We set the boxes to the finished wall depth, coordinate with plumbing and HVAC so nothing conflicts, and leave the rough-in ready for inspection. A clean rough-in is what makes the finish stage fast and trouble-free. It is also inspected before the walls close.
Once the walls are closed and painted, we return to install the devices, fixtures, and appliances, landing everything on the circuits we roughed in. GFCI and AFCI protection go in where code requires, and the panel directory is updated to reflect the new circuits. We test every device and carry the job through final NYC DOB inspection and sign-off. The result is a renovated space that is as sound behind the walls as it looks in front of them.
Remodel and renovation wiring is a steady part of our work across Queens, especially in Forest Hills, Kew Gardens, Astoria, Long Island City, and Bayside.